It's time to
monitor your substation
intelligently
InduS+ is a modern SCADA platform that collects real-time data over Modbus TCP and IEC 60870-5-104 protocols, delivering reliable substation monitoring through an alarm system and an interactive HMI.
A complete monitoring
platform for substations
From data collection to visualization — every stage in one system.
Real-Time Dashboard
Analog measurements, digital signals, sparkline trends — all on a single screen, updated automatically via WebSocket.
Live WS PushSLD Diagram
View the substation's single-line diagram interactively, with the real-time state of every element reflected directly on screen.
SVG-basedTime-Series Analytics
Instantly browse years of historical data backed by TimescaleDB, with date-range selection for comparison.
TimescaleDBAlarm Management
A full alarm system with three states — Active, Acknowledged, Cleared. Operators acknowledge alarms to confirm status.
IEC StandardTag Configuration
Bulk import from Excel, search, pagination, Modbus and IEC104 configuration — all on one screen.
Excel ImportUser Management
A four-tier permission system — Super Admin, Admin, Operator, Viewer — with bcrypt encryption and forced login.
Role-based AuthLive today at 5 substations
InduS+ is installed at the substations below, collecting equipment data in real time and providing 24/7 monitoring through alarms and HMI screens.
- Selbe SubstationLive
- Ilchbayan SubstationLive
- Dari-Ekh SubstationLive
- Umard SubstationLive
- Dunjingarav SubstationLive
- Real-time dataModbus TCP · IEC 60870-5-104
- Alarm monitoringHigh · Low · ROC · Digital
- HMI screensSLD diagrams, trends, history
InduS+ HMI in live operation
Screens from the system running at Ilchbayan substation.
Compatible with industry-
standard protocols
Connects directly to any RTU, PLC, or IED device.
Modbus TCP
IEC 60870-5 · IEEE standard
- FC02 — Discrete Inputs
- FC04 — Input Registers (16-bit analog input)
- FC05 — Write Coil (remote control)
- Per-tag scan rate
- Signed / Unsigned Int16 support
- Automatic reconnection, fault tolerance
IEC 60870-5-104
International power-utility standard
- M_SP_NA_1 · M_DP_NA_1 — Digital signals
- M_ME_NC_1 · M_ME_TF_1 — Analog measurements
- General Interrogation — full initial retrieval
- Spontaneous push and periodic poll
- STARTDT · TESTFR heartbeat
- Per-tag scan_rate, history_rate configuration
Detects fault conditions
the moment they occur
A four-condition alarm engine with advanced settings such as deadband and duration.
High / Low — Threshold Monitoring
An alarm triggers when a value exceeds an upper or lower limit. Deadband settings eliminate alarm "chattering".
Duration — Sustained Time
An alarm fires only after a condition holds continuously for N seconds, guarding against short-lived spikes.
ROC — Rate of Change
Detects when a value changes too quickly, catching conditions like a sudden rise in transformer temperature the moment they occur.
Digital Change — Signal Transition
Detects a rising edge (0→1), falling edge (1→0), or a change in either direction — ideal for breaker and protection signals.
A reliable, scalable
system architecture
Built on microservice principles — each component runs independently.
On-premise
Runs on a server on-site. No internet connection required. Data stays within the organization.
Real-Time Updates
WebSocket push technology delivers real-time data to the HMI with millisecond latency.
Easy Configuration
Excel import and full UI-based configuration. Every service is managed from a single config.json file.
Built on reliable,
open technologies
Ready to be installed
at your substation
InduS+ is a modern SCADA solution for power transmission and distribution facilities, built to fit Mongolia's operating conditions.
- +976 7272-7002
+976 9905-3216 - contact@smartdata.mn
- Office 502, World Wine Center, Bayangol District, 26th Khoroo, Ulaanbaatar
